KIX-OnlineLinks to amateur (ham) radio goodies on the web

So, here I was at Dayton a few weeks ago and decided to check out the fox hunting/amateur radio direction finding (ARDF) forum.  I forgot who did the forum, but it was actually very well done.  One of the projects I learned about was “The Montreal Doppler”.  This is a really neat project designed by Jacques Brodeur, VE2EMM.

I saw many neat attenuators, offset attenuators….. but this….. well…. it has LEDS!  Pretty lights…. OK, I digress.  Working with a bunch of these LED’s is pretty kewl and looks sweet.  This is a project that is well documented on the web and I’ll provide links below.

The biggest question I had was, where do I get the microcontrollers and firmware.  Not only was I able to acquire the PICS (microcontrollers), but I was able to get PC boards and the LCD for a very reasonable price from FAR Circuits!  I know I picked up the last one he had at Dayton, but he may be able to do more (they cost $45.00).  Check out the FAR circuits website at http://www.farcircuits.net/

A little about this project from VE2EMM’s website, list of features:

-   36 LEDs display; center LED when green = good signal, when red = no signal ,  the direction is frozen to the last good signal.
-   Uses 3 PICs; a PIC16F628A for the display, a PIC18F4520 as the main processor and a PIC12F675 as a frequency divider.
-   Filters; a Max 267, the best bandpass filter that I have ever seen, followed by the Roanoke switch cap filter for very narrow band width (+/- 0.5Hz).
-   My DopplerII integrating and phase detection software in the main PIC.
-   LM386 for monitoring the audio independently from the doppler.
-   Simpler menu selection, turning a selection pot and a pushing a DO switch.
-   It will switch 4 antennas with a + or – going signal, 4 antennas differential, 8 antennas with a + or – going signal.
-   Pushing the DO PB sends the direction to APRS.  The protocol is:  <cr><lf>%359/Q<cr><lf>. The Q (0<8) is the quality of the signal just before the
extraction of the phase information.
-   GPS information goes through the doppler, it will be instantly interrupted when the doppler sends a DF to APRS on a PC.
-   Faster main processor, PIC18F4520.    **** NEW ****  June 06

The model I saw really intrigued me and there are a few really well done websites devoted to this project (it has quite the cult following).

The original site is at:

http://www.qsl.net/ve2emm/pic-projects/doppler3/doppler3-e.html

Here is another page on Jacques site that has some examples from other builders:

http://www.qsl.net/ve2emm/pic-projects/doppler3/md3_photos/dopler%203%20pictures.html

KA7OEI has a neat page with a bunch of information on this project:

http://ka7oei.com/emm3.html

He has a lot of information about an alternate firmware that looks like the image below:

The alternate firmware page is at:

http://ka7oei.com/emm2_mont2a.html

If you have any more information on this project, resources or anything of the sort, please comment below.